Quality Assurance

QUALITY CONTROL

MATERIAL RECEIVING INSPECTIONS

Material Inspections are carried out as follows:

1. DIMENSIONAL INSPECTION

Dimensions are checked at each end of the purchased material.

2. VISUAL INSPECTION

Surface check to ensure that material is correct and suitable for production of products.

3. COLLATING

Tests are done to ensure that the chemical composition and tensile properties of the described items are exactly as shown in the material certificates.

IN-PROCESS INSPECTIONS

Products are manufactured from carefully selected materials of the finest metallurgical quality on well-controlled jigs, tools and molds. In order to ensure that all products meet quality specifications, the following in-process inspections are performed.

·        Visual Inspection

·        Dimensional Inspection

·        Shape Inspection

·        Hardness Test

·        Temperature Check

·        Processing Conditions Check

·        Material Identification (marking)

·        Other Inspections

FINAL INSPECTIONS:

Our products are subject to the following final inspections before they are packed and delivered.

1. VISUAL INSPECTION

Both internal and external surfaces are checked to confirm they are smooth and do not bear any harmful defects.

2. DIMENSIONAL INSPECTION

Done to ensure that all products are in conformity with dimensional tolerances of relevant Codes and standards.

3. SPECIAL INSPECTION

Non-destructive examinations and mechanical tests are performed as per customer’s Request.

4. CERTIFICATION

THIRD-PARTY INSPECTIONS

The Third-Party Agencies such as BV, LR, DNV, SGS, etc. … are welcome for Inspection of our products at any stage during or after the production according to the client’s Inspection requirements.